Сурет
1150 HP AC Air Cooled Motors
Wabtec manufactures rugged electric AC motors for the toughest applications in the oil & gas industry.
Manufactured in Erie, Pennsylvania for over 20 years
- Over 8,000 units shipped for operation by most global drilling contractors. Thousands more produced for Locomotive and Mining applications
- ATEX, IECEx, CAN/CSA, ANSI/UL hazardous area certifications
- ABS, DNV marine class certifications
- Tape heaters; 200 watts on each end for superior winding protection
- Power connection box field convertible (left to right side), with copper bar connections to the motor end rings.
- Form wound copper stator windings
- 4340 alloy steel – ABS certified motor shafts
- 20 year design life – 1.5 design margin
1150 HP (858 kW) AC Motors
5GEB22 Series
Models
- 5GEB22A
The original GEB22 AC model with 5GE752 footprint, shaft height and bearings. - 5GEB22D
The same as 5GEB22A except with an oversized shaft extension for belted side loads. - 5GEB22E
The same as 5GEB22A except smaller roller bearing for direct coupled shaft with no side load.
Quick Facts
- 6-pole stator with “form-wound” windings
- Copper chromium alloy rotor bars
- Class H insulation, robotically taped, Mica-Kapton system
- 4340 alloy shafts
- Insulated bearings on non-drive end
- Single shaft extension with hub
- IP56 stainless steel connection box, field convertible from A to B side.
- Winding RTDs, 100-ohm platinum; 2 per phase
- Pressure sensor to verify ventilation
- 15 HP (13 kW) blower assembly – 3,000 scfm
- Air Intake louvers to protect from water ingress
- Tape heaters 200 watts on each end of motor
- IP44 assembly rating
- Same shaft height and mounting feet dimensions as the 5GE752. 5GEB22D Shaft diameter and hub are larger.
