Independent testing found that the system conformed to MOSH performance requirements for detection, warning, intervention and fail-to-safe functions under the tested conditions, an important step toward higher-level validation on South African mine sites
Wabtec Digital Mine’s Generation 3 Collision Avoidance System (CAS Gen 3) has completed the Technology Readiness Level 4 (TRL4) stage gate for surface Collision Warning and Avoidance Devices (CxD). The testing was conducted by VDG Solutions, a business unit of Enterprises University of Pretoria
The TRL4 programme is run under the Mining Industry Occupational Safety and Health (MOSH) initiative of the Minerals Council South Africa. It gives mines independent, scientific evidence of how a collision prevention system performs, rather than relying on manufacturer claims. In its stage gate report dated 25 September 2026, the University confirmed that the TRL4 status of Wabtec’s CAS Gen 3 is complete.
Rigorous, independent evaluation
The programme assessed CAS Gen 3 in six test modules between February 2024 and August 2026:
- ISO/TS 21815-2:2021 interface – confirming standardised communication between the collision avoidance device and the machine.
- Log keeping – confirming accurate recording of events for investigation and compliance.
- Self-diagnostics – confirming continuous monitoring of system health.
- Detection and tracking – confirming the system identified and followed other vehicles in the tested scenarios.
- Effective warning – confirming operators receive timely, actionable alerts.
- Controller (interaction scenarios) – confirming the system automatically slowed or stopped machines to avoid collisions in the tested scenarios.
The final Controller test put CAS Gen 3 through 13 real-world interaction scenarios using instrumented test vehicles and a machine emulator. The scenarios covered speed-limited zones, no-go zones, light vehicle approaches to heavy mining equipment, rear-end and overtaking manoeuvres on straight and curved roads, head-on and passing interactions, T-junctions, multi-vehicle intersections, dump, loading and parking areas, and maintenance override.
The system conformed to the MOSH specification in each scenario tested. The University recorded the following results:
- No false interventions or false warnings recorded during testing – a key factor in operator trust and operational continuity.
- An effective operator warning before every automatic slow-down or stop intervention, giving the operator the opportunity to respond before intervention.
- Consistent stopping distances within specification at speeds of up to 40 km/h. In low-speed dump and loading areas, separation of 2.5 to 3.2 metres was maintained, within the required 1 to 4 metre band, without operators needing to override or bypass the system.
- Correct fail-to-safe behaviour. When a fault was induced, the system failed safe, and a technician could activate a credential-protected maintenance override implemented to ISO 21815-1:2022.
- Normal operation allowed to continue when the system did not identify a significant risk, so vehicles could overtake and pass in the tested scenarios.
The University concluded that Gen 3 CAS conforms to the controller functions specified in the MOSH functional and technical performance requirements for Surface Mine Collision Warning and Avoidance Devices.
“Wabtec has been developing, testing, validating and deploying collision avoidance solutions aligned to Level 9 for close to 8 years. Completing TRL4 with the University of Pretoria reflects Wabtec’s long-standing investment in developing solutions that support safer mine operations,” said Mitch Tanzer, Global Commercial Director for Wabtec Digital Mine.
Supporting South Africa’s Level 9 journey
South Africa’s Trackless Mobile Machinery (TMM) regulations require mines to implement collision prevention up to Level 9 of the EMESRT vehicle interaction framework. At that level, the system automatically slows or stops a machine if the operator does not respond to a hazard. The TRL4 results provide South African mine owners with independent information they may consider in technology selection and compliance planning. Each mine remains responsible for its own regulatory compliance.
Developed collaboratively, tested independently
CAS Gen 3 was launched in 2023 and developed in collaboration with a major global mining company. The system is designed to go beyond traditional proximity detection to collision avoidance. Its rules-and-intelligence engine is designed to manage complex vehicle-to-vehicle interactions, and voice-based warnings are intended to help reduce alarm fatigue. Real-time system health monitoring is designed to alert operators to conditions that could compromise safe operation. The system is designed for installation across mixed fleets.
If you would like more information on CAS Gen 3, please contact Wabtec Digital Mine’s Global Commercial Director, Mitch Tanzer at apac [dot] dmt [at] wabtec [dot] com (apac[dot]dmt[at]wabtec[dot]com)
Results described in this article reflect performance under the specific test conditions of the University of Pretoria TRL4 programme and may not be indicative of performance in every operating environment. This article may contain forward-looking statements, which are subject to risks and uncertainties described in Wabtec’s filings with the U.S. Securities and Exchange Commission. Wabtec undertakes no obligation to update any forward-looking statement.