1150 HP AC Air Cooled Motors

Wabtec Drill Motor 1150 AC
Wabtec Drill Motor 1150 AC

Wabtec manufactures rugged electric AC motors for the toughest applications in the oil & gas industry.

Manufactured in Erie, Pennsylvania for over 20 years

  • Over 8,000 units shipped for operation by most global drilling contractors. Thousands more produced for Locomotive and Mining applications
  • ATEX, IECEx, CAN/CSA, ANSI/UL hazardous area certifications
  • ABS, DNV marine class certifications
  • Tape heaters; 200 watts on each end for superior winding protection
  • Power connection box field convertible (left to right side), with copper bar connections to the motor end rings.
  • Form wound copper stator windings
  • 4340 alloy steel – ABS certified motor shafts
  • 20 year design life – 1.5 design margin

 

1150 HP (858 kW) AC Motors

5GEB22 Series

Models

  • 5GEB22A
    The original GEB22 AC model with 5GE752 footprint, shaft height and bearings.
  • 5GEB22D
    The same as 5GEB22A except with an oversized shaft extension for belted side loads.
  • 5GEB22E
    The same as 5GEB22A except smaller roller bearing for direct coupled shaft with no side load.

Quick Facts

Imagen
Wabtec Drill Motor 1150 AC Ratings
  • 6-pole stator with “form-wound” windings
  • Copper chromium alloy rotor bars
  • Class H insulation, robotically taped, Mica-Kapton system
  • 4340 alloy shafts
  • Insulated bearings on non-drive end
  • Single shaft extension with hub  
  • IP56 stainless steel connection box, field convertible from A to B side.
  • Winding RTDs, 100-ohm platinum; 2 per phase
  • Pressure sensor to verify ventilation
  • 15 HP (13 kW) blower assembly – 3,000 scfm
  • Air Intake louvers to protect from water ingress
  • Tape heaters 200 watts on each end of motor
  • IP44 assembly rating
  • Same shaft height and mounting feet dimensions as the 5GE752. 5GEB22D Shaft diameter and hub are larger.
Contact Us

Wabtec Drilling Solutions

CAPTCHA
Esta pregunta es para comprobar si usted es un visitante humano y prevenir envíos de spam automatizado.
SALES & SUPPORT

For the fastest response time, please fill out the contact form.

If you prefer to contact us directly, email to: msdproducts [at] wabtec [dot] com (subject: Wabtec%20Drilling%20Solutions%20Website%20Inquiry) (msdproducts[at]wabtec[dot]com).